Injin yin bene na ƙarfe na farantin bene na ƙarfe

Injin yin bene na farantin ƙarfe mai kauri tayal ɗin bene mai kauri

Injin yin bene na ƙarfe na ƙarfe ana yin sa ne da farantin ƙarfe na galvanized bayan an naɗe shi da sanyi, ɓangarensa ya zama siffa ta v, siffar u, trapezoid ko makamancin haka, ana iya zaɓar nau'ikan siffar raƙuman ruwa da yawa, waɗanda galibi ake amfani da su don samfuri na dindindin, kuma ana iya zaɓar su don kowane dalili. Ana amfani da farkon nau'in farantin ƙarfe mai matsin lamba don bangarorin rufin a rufin masana'anta, kuma bayan nau'in matsin lamba, farantin ƙarfe da ake amfani da shi don benaye ana rarraba shi a hankali azaman bene na ƙarfe.Na'urar Bugawa.

Kayan aiki:

Kauri na Kayan Aiki: 0.8-1.5mm ko 1.5-2.0mm

Kayan da ya dace: GI, ƙarfe mai sanyi mai juyi tare da ƙarfin yawan amfanin ƙasa 235-550Mpa

Tsarin Aiki:

Kayan Inji:

1. Na'urar Decoiler ta hannu: saiti ɗaya

Ba a kunna wutar lantarki ba, sarrafa ƙurar ciki ta bututun ƙarfe da hannu da kuma dakatarwa

Matsakaicin faɗin ciyarwa: 1250mm, kewayon ID na coil 508±30mm

Ƙarfin aiki: Matsakaicin tan 7

2. Na'urar Jagorar Ciyarwa:

Na'urar jagorar ciyarwa zata iya sarrafa faɗin ciyar da kayan

3. Babban Injin:

Tsarin jiki da aka yi da ƙarfe irin H400 ta hanyar walda, kauri bango na gefe: Q235 t18mm

An ƙera rollers daga ƙarfe 45#, fata CNC, maganin zafi, mai rufin chrome mai tauri, mai kauri 0.04mm, saman da aka yi wa magani da madubi (don tsawon rai hana tsatsa.)

Kayan da ake amfani da shi don yin birgima: ƙarfe mai ɗaukar nauyi Gcr15 don tsawon rai na aiki, maganin zafi

Diamita na shaft:Φ90/95mm, an yi masa injin daidaitacce

Tukin Gear/Sprocket, kimanin matakai 24 don yin tsari,

Babban injin: 11*2kw, sarrafa saurin mita

Gudun tsari na gaske: 0-20m/min (ba tare da lokacin yankewa ba)

4. Na'urar yankewa bayan amfani da na'urar hydraulic:

Aika zuwa yanke, tsayawa zuwa yankewa, guda biyu nau'in ƙirar ruwan wukake, babu ɓoyewa

Motar injin ruwa: 5.5kw, Matsin yankewa: 0-12Mpa,

Kayan aikin yankewa: Cr12Mov(=SKD11 tare da aƙalla sau miliyan ɗaya na tsawon rayuwar yankewa), maganin zafi zuwa digiri 58-62 na HRC

Babban tashar injin hydraulic ce ke samar da wutar lantarki ta yanke wutar lantarki

5. Tsarin sarrafa PLC:

Sarrafa adadi da tsawon yanke ta atomatik

Shigar da bayanan samarwa (batun samarwa, kwamfutoci, tsawon lokaci, da sauransu)) akan allon taɓawa, yana iya gama samarwa ta atomatik tare da: PLC, Inverter, Touch Screen, Encoder, da sauransu

6. Fita daga Rack:

Ba a kunna wutar lantarki ba, na'urori uku, tare da na'urori masu juyawa don sauƙin motsi

7. Nunin Samfura:

Nau'in Marufi:

Babban jikin injin yana tsirara kuma an rufe shi da fim ɗin filastik (don kare ƙura da tsatsa)), an ɗora su a cikin akwati kuma an gyara su a hankali a cikin akwati wanda ya dace da igiya da makulli na ƙarfe, wanda ya dace da jigilar nesa.